/dev/hda:

ATA device, with non-removable media
	Model Number:       IC25N060ATMR04-0                        
	Serial Number:      MRG308K3JH6E3H
	Firmware Revision:  MO3OAD4A
Standards:
	Used: ATA/ATAPI-6 T13 1410D revision 3a 
	Supported: 6 5 4 3 
Configuration:
	Logical		max	current
	cylinders	16383	65535
	heads		16	1
	sectors/track	63	63
	--
	CHS current addressable sectors:    4128705
	LBA    user addressable sectors:  117210240
	LBA48  user addressable sectors:  117210240
	device size with M = 1024*1024:       57231 MBytes
	device size with M = 1000*1000:       60011 MBytes (60 GB)
Capabilities:
	LBA, IORDY(can be disabled)
	bytes avail on r/w long: 4	Queue depth: 1
	Standby timer values: spec'd by Vendor, no device specific minimum
	R/W multiple sector transfer: Max = 16	Current = 16
	Advanced power management level: 128 (0x80)
	Recommended acoustic management value: 128, current value: 254
	DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 
	     Cycle time: min=120ns recommended=120ns
	PIO: pio0 pio1 pio2 pio3 pio4 
	     Cycle time: no flow control=240ns  IORDY flow control=120ns
Commands/features:
	Enabled	Supported:
	   *	NOP cmd
	   *	READ BUFFER cmd
	   *	WRITE BUFFER cmd
	   *	Host Protected Area feature set
	   *	Look-ahead
	   *	Write cache
	   *	Power Management feature set
	   *	Security Mode feature set
	   *	SMART feature set
	   *	FLUSH CACHE EXT command
	   *	Mandatory FLUSH CACHE command 
	   *	Device Configuration Overlay feature set 
	   *	48-bit Address feature set 
		Automatic Acoustic Management feature set 
		SET MAX security extension
		Address Offset Reserved Area Boot
	   *	SET FEATURES subcommand required to spinup after power up
		Power-Up In Standby feature set
	   *	Advanced Power Management feature set
	   *	General Purpose Logging feature set
	   *	SMART self-test 
	   *	SMART error logging 
Security: 
	Master password revision code = 65534
		supported
		enabled
	not	locked
	not	frozen
	not	expired: security count
	not	supported: enhanced erase
	Security level high
	50min for SECURITY ERASE UNIT. 
HW reset results:
	CBLID- above Vih
	Device num = 0 determined by the jumper
Checksum: correct